CAP
A.) Type Range
ELBOW 90° LR & SR
ELBOW 45° LR & SR
ELBOW 180° LR & SR
EQUAL TEE / RED- TEE
CON-RED / ECC-RED
STUB END TYPE A & B
CROSS / RED CROSS
CAP
B.) Materials
Steel grade 304、304H、304L、316L、321、321H、347H、317L、904L etc.
Duplex steel S32205、S32750、S31803 etc.
C.) Thickness: SCH5 / 10S /40 / 40S / 80 / 80S / STD / XS / XXS /160
D.) Size
Seamless : 1/2" (21.3mm) to 24" ( 610mm)
Welded : 1/2" (21.3mm) to 64" ( 1620mm)
E.) Standard
ASME B16.9 / B16.28 / B16.5-2016
EN 10253-3 / -4
| Outside Diameter (OD) | Length | Limiting Wall Thickness for Length E | |||
| Nominal Pipe Size (DN) | Nominal Pipe Size (NPS) | OD at Bevel (MM) | E | E1 | |
| 15 | 1/2" | 21.34 | 25 | 25 | 4.57 |
| 20 | 3/4" | 26.67 | 25 | 25 | 3.81 |
| 25 | 1" | 33.4 | 38 | 38 | 4.57 |
| 32 | 1-1/4" | 42.16 | 38 | 38 | 4.83 |
| 40 | 1-1/2" | 48.26 | 38 | 38 | 5.08 |
| 50 | 2" | 60.3 | 38 | 44 | 5.59 |
| 65 | 2-1/2" | 73.03 | 38 | 51 | 7.11 |
| 80 | 3" | 88.9 | 51 | 64 | 7.62 |
| 90 | 3-1/2" | 101.6 | 64 | 76 | 8.13 |
| 100 | 4" | 114.3 | 64 | 76 | 8.64 |
| 125 | 5" | 141.3 | 76 | 89 | 9.65 |
| 150 | 6" | 168.3 | 89 | 102 | 10.92 |
| 200 | 8" | 219.1 | 102 | 127 | 12.7 |
| 250 | 10" | 273 | 127 | 152 | 12.7 |
| 300 | 12" | 323.9 | 152 | 178 | 12.7 |
| 350 | 14" | 355.6 | 165 | 191 | 12.7 |
| 400 | 16" | 406.4 | 178 | 203 | 12.7 |
| 450 | 18" | 457 | 203 | 229 | 12.7 |
| 500 | 20" | 508 | 229 | 254 | 12.7 |
| 550 | 22" | 559 | 254 | 254 | 12.7 |
| 600 | 24" | 610 | 267 | 305 | 12.7 |
| 650 | 26" | 660 | 267 | / | / |
| 700 | 28" | 711 | 267 | / | / |
| 750 | 30" | 762 | 267 | / | / |
| 800 | 32" | 813 | 267 | / | / |
| 850 | 34" | 864 | 267 | / | / |
| 900 | 36" | 914 | 267 | / | / |
| 950 | 38" | 965 | 305 | / | / |
| 1000 | 40" | 1016 | 305 | / | / |
| 1050 | 42" | 1067 | 305 | / | / |
| 1100 | 44" | 1118 | 343 | / | / |
| 1150 | 46" | 1168 | 343 | / | / |
| 1200 | 48" | 1219 | 343 | / | / |
General Notes:
(a) All dimensions are in millimeters
(b) The shape of these caps shall be ellipsoidal and shall conform to the requriements given in the ASME Boiler and Pressure Vessel Code.
(a) All dimensions are in millimeters
(b) The shape of these caps shall be ellipsoidal and shall conform to the requriements given in the ASME Boiler and Pressure Vessel Code.
Prev：WELDING-NECK
Next：CONCENTRIC-REDUCER
